Page Comparison

Cornflakes

Alison Thompson

Updates:

• Horizontal stabilizer modifications in progress - stiffening it with aluminum boxtube

• New, taller landing gear to fit 16” propeller

• Stiffening the cabin - upcoming - Alison Thompson

  • velcro lid - Alison Thompson

• redid control horns shout out to Nathan

• redid control rods shout out to Justinflew, didn’t crash, nothing broken!

• boxtube good stiffener

• shout out to Nathan Green for the sick control horns that bolt in

Competition Frame updates

Conall Kingshott

Megan Spee

this didn’t exactly happen

**Everything is now urgent. If you can’t complete it, you need to tell me so I can re-delegate it

Stiffener mount:
- Hrishik Patel need updates. If this is done, the file needs to be sent for printing

Front support bar:

• Andrew Wright to re-print in CF PETG

Fuselage Skin:
- Andrew Wright Updates?

• velcro in place, fuselage skin still needs work

• Dremel part of this skin on weekend Conall Kingshott

• see #mech-bounties for a list of things to dremel. Please add things to this list if:

  • the piece is carbon fiber on ICARUS

  • it interferes with anything on the frame

• Alison Thompson to drive fuselage skin

Tail - vert stabilizers Andrew Wright
- Design ready to go, needs to be built**

Fuselage skin - Alison Thompson / Conall Kingshott

Avionics bay - Conall Kingshott

Landing gear - Alison Thompson

• test these, make sure it all fits, then print the other 2 if goes well

Nose/tail - Andrew Wright

• Coat the nose cone and tail cone with epoxytesting went well? for weatherproofing?

Bay door - Vishal Jayakumar

• We need a connection to the frame urgently

• glue and epoxy testing occurring

begin hinges

connected to door

Motor Mounts - Andrew Wright

• exists in cad, revise and print

• clear any interference - mark things for dremeling

Motor Mounts:

• This is my (Conall Kingshott ) fault for taking so long or ordering bolts. They will be ordered right after this meeting and I will deal with assembling them last minute.

• Andrew Wright If these haven’t been printed because of lack of testing, print what you’ve got so far and we’ll make it work.

not quite as urgent -

• Done

Passenger Cabin Seats/ Interior - Sohee Yoon , Luke Johnston

• Prelim cad

• pull up the photos?

  • think about how this will be printed

  • sohee is onsite, luke is not, theraband will need to be cut and chairs will be printed. prototype prints should be upcoming mid-this week

Other electronics mounting (slightly less urgent)

• FPV camera for nose cone - Megan Spee

  • cad done, prototype printed, needs to be printed in CF and mounted to nose. awaiting final nose cone coating/assessment

• Sensor stack @ bottom of fuselage - Megan Spee

  • WIP

• Airspeed sensor mount to nose cone - Megan Spee

  • cad done, prototype printed, needs to be printed in CF and mounted to nose. awaiting final nose cone coating/assessment

• ESC cases - Megan Spee , Nathan Green discuss this in icarus sync

  • printed prototype, test fit?

• RFD900x case - Andrew Wright

  • prototype design, print soon

• VTX case - Andrew Wright

  • to be designedprototype design, print soon

Go to the icarus syncs (TUES 9pm) to stay up-to-date cross subteam

the mechanical issue with the icarus/ cornflakes model

The push prop doesn’t have enough untampered airflow

cornflakes was not able to generate enough forwards thrust to successfully transition to fixed-wing flight on weekend

Flight tests and comp simulations

Megan Speelets not crash x3

there is mech work to do, come grind icarus

Tracking antenna

Megan Spee Andy Zhang Jason Li

Updates

3D print queue

Megan Spee

https://docs.google.com/spreadsheets/d/1Q_br9GBNeDQyoC_tTMmVR7JwFED_s-bB0_7Q1zc3o6I/edit?usp=sharing

omnipresent safety reminder

composites room for any fiberglass and carbon fiber (CF).

PLEASE be safe lol. these are carcinogens

don’t do this if you don’t feel safe!
paint room for spray paint!