...
https://www.digikey.ca/en/products/detail/koa-speer-electronics-inc/PSL2NTEBL500F/1039674
Block Diagram
...
View file | ||
---|---|---|
|
The 12V output is left as a power pad so that a connector can be soldered onto it and a harness can be made as needed
The Molex connector is based on the connector standard for the Pixhawk, shown below
A 5V-3.3V LDO was added to provide a 3.3V rail for the SCL and SDA lines, as per the Pixhawk standard
...