...
Item | Reason |
|---|---|
6s to 12V voltage step down | The board need to be compatiable working along with VTX system, which needs 12V power supply |
6s to 5V voltage step down | Many electronic components on tracking antenna are using 5V power supply |
Shield for plugging nucleo l5 (I am wondering maybe we could use a smaller nucleo if it is not too hard to tell EFS ppl to change it) | We need the nucleo board for its strong functionalities while allowing the code can be easily flash to it. Also this makes the pcb design less complicated |
Grouped pinout for tracking antenna firmware peripherals | Sensors talks to nucleo through the pcb board |
Current rated for 8A or even 10A ? | Servos and the VTX consume a lot of current, which requires the board being able to withstand consistent high current draw |
Current & Voltage Sensing | Protect the important components from burning |
...