Tip
Make sure to update the Title following the format “Jan 01, 2020 Flight Test”

Date/Time	Action
	Aircraft Assembly If aircraft assembly is complicated, outline dates of various milestones that should be met to ensure we don't rush to complete work at the last minute.
	Pre-flight Preparation Feel free to not come at 9 if you don’t have a lot workload. During this time get snack if needed
July 23, 10 am	Required persons for preflight preparation show up at bay Flight test lead breifly assign task for preparation work
July 23, 11:30 am	Flight brief from flight test lead
July 23, 12 pm	Loading onto the Car Take your water bottle with you. Go washroom before we leave!
July 23, 1 pm	Drive to the test ground
July 23, 1-2:45 pm	Flight Testing
July 23, 3 pm	Debrief

🧯 Aircraft Incident Procedures

Incident	Procedure
Crash	Outline the procedure for who will go to handle the aircraft in the event of a crash, what should be done, were emergency equipment is, etc.
Flyaway	Outline the procedure for flyaways. List relevant contact information for local authorities and plans of action to recover control of the aircraft
Configuration Error	Outline steps to take in the event of a configuration issue with the aircraft
Injury
Property Damage

🔧 Week-Before To-Do List

...

Item	Owner
Use Flight-Post Mortem to Debrief	ALL MEMBERS PRESENT
Discard of damaged batteries
Discharge used batteries for better longevity

1st Test Flight:

Between 1st and 2nd Test Flight:

Checking Jetson after 1st test flight found that run.sh execution on startup was disabled (even though this was specifically enabled before test flight #1

Rebooted the Jetson before 2nd test flight and checked the Jetson’s file system to see that SD started logging footage again, meaning run.sh successfully executed on startup after the reboot.

2nd Test Flight:

CV Camera successfully logged footage to SD card
Video more purple than previous flight test, which led to poor landing pad detection model performance

Tip
Video Logged Successfully

Note
Warning
, Need to re-tune the CV camera to remove the purple hue

Warning
Investigate why SD card was not storing any footage- if issue came from run.sh not running on startup or some other source

Create a RCA and keep it as a child page.

...