Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

Tip

FTC: Make sure to update the Title following the format “2020-01-30 Flight Test”

...

Incident	Location	Procedure
Crash	WRESTRC	Identify last known location & flight path of the aircraft Divide into teams of 3 and decide on communication protocol
Crash	< otherwise >
Flyaway		Outline the procedure for flyaways. List relevant contact information for local authorities and plans of action to recover control of the aircraft
Fire	WRESTRC	Designate 911 contact Describe incident (Drone crashed, contains LiPo batteries) Give location of team (Skid pad at the Waterloo Region Emergency Services Training Center) Give best approximation of the location of the drone
Fire	< otherwise >
Injury		Apply first aid as required.
Property Damage

...

Expand

title	Pre-Departure Checklist

Confirm the Raspberry Pi is securely attached to the drone.
Confirm the image collection software runs when the Raspberris powered on.
Take the WARG laptop, CamLink, HTMI cable, key board and mouse.

Take the WREST RC entrance card
Grab Pre-departure Items

Battery charger and associated cables(30tx to 60tx)

Check battery status

Charge if required, otherwise place into flight box

Systems test

Check flight controller orientation
Check motor spin & rotation direction
Check transmitter mappings
Verify communication links (VTX/RX, Controller, Groundstation)
Verify the mission planner is logging data

Only attach props directly before flight (keep off at all other times)
Get snacks
Mission Briefing

Read the flight plan to the team (that was made a week ago)
Purpose of flight
Plan of action
Success criteria
Delegate and brief on flight line roles
Safety Briefing
Key flight characteristics to observe
Key system characteristics to observe
Measurements to be made

...