Page Comparison

Frame

Conall Kingshott

Jonathan Di Giorgio has finished up the clamping blocks, and they are installed on the drone

Battery Shrouds

Smile Khatri

• Carbon fiber layups were completed last Saturday.

• Andy has contacted E3 for water jetting the shrouds. E3 should be operational next week because they need to fix their waterjet.

• Brian at E3 said cutting it with a bandsaw would do and the piece was too flimsy for the waterjet and a waste of time / resources

• (Andy) Took Friday to cut all the carbon shrouds so its now 4 pieces that just needs to be sanded, cleaned (can the wax be washed off?) and then epoxy it onto the PLA clips.

• If someone has time, we could just tape the carbon plates onto the clips to test how it feels before doing a more permanent solution

Cabin

Alison Thompson

Cabin is looking great! Looks like we’re ready to order CF tubes from composites canada and get started on making layups for the first revision!

Layups on pause as we need to order resin with the CF tubes, will get them done as soon as we can after resin arrives. I will start procurement after the meeting and will update when we’ve got a better timeline on when these supplies arrive.

Compostites canada order:

• https://shop.compositescanada.com/#/product/CFT-10x9TW 1.2m of CF tubes, makes ~4 skeleton tubes, (technically 4.6) thoughts on how many we should buy? price: 15.58 each (I’m not logged in though and it sounds like prices are different that way?). My thought is to get 3? enough for 2 cabins + if we want to use any for the doors?

• https://shop.compositescanada.com/#/product/AE3630-Q aeropoxy hardener, price 72.52 (Nathan’s price), I think we just get one of these because there’s a bunch in the composites room already

• https://shop.compositescanada.com/#/product/AE2033-X aeropoxy resin, price 187.58 (Nathan’s price), just get one cuz this is a lot

Who is interested in helping with layups? I want to note names here so we make sure you get pinged when scheduling:

• Georgia Vachon Westerlund

• Smile Khatri

Other updates?

• Evan Janakievski Skeleton

• Sohee Yoon Aero-Panel Mounting

• Georgia Vachon Westerlund Aero-Panels

• Jason Li Seats

• Wallace Lee Cargo Compartment

New tasks!

• Interior Layout

• Windows

• Cargo Bay and Passenger Cabin Door(s)

New Lead

Conall Kingshott

Alison Thompson Will be a mech lead next term

Conall Kingshott is stepping down, but will still be around plenty

Work Session

Conall Kingshott

• When do we want a work session? Does the 2nd make sense since we’ll have Composites Canada stuff in?

  • work session on the 26th