...
We need to design a yaw servo mount made out of aluminum to maintain structural integrity.
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Made out of aluminum |
| |
Machinable |
| |
Integration with Height Adjustment Mechanism |
|
Relevant Contacts
To be written by the component owner and should be used if collaborating with another subteam. This should be the “component owner” of the other subteam and/or the person on those subteams. Delete if not used. DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Subteam | Contact | Contact Description |
|---|---|---|
Mechanical | Collaboration with height adjustment mechanism integration. |
...
Depending on if we need two antenna trackers, we may need a new yaw servo mount, since we only have one discontinued servo with a compatible gearbox
Author: Arjun Mandair Date:
Countersunk or counterbore holes
Currently, the yaw-axis servo is experiencing stabilization issues, since the bolts are too far out from the servo. This was placed initially due to interference from the tripod. For the next iteration, we will utilize counterbore/countersink holes, and a bigger baseplate, to bring the bolts closer.