...
Assignees
Assignee | Asana Task | Date |
---|---|---|
|
...
The mount on the left is also modified, and it also needs to be re-manufactured because new material are added.
Both modifications are made because the previous design don’t have much room to work with in terms of drilling more screw holes on the already made part to make the servo more stable.
This design can be found in the folder under dir: C:\WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker\ANTENNA_TRACKER_06_SERVO_MOUNT\ANTENNA_TRACKER_SERVO_MOUNT_STABILIZATION_MOD_07MAR2024
The aluminium sheets in this design are the same as in the previous, (because I have not seem the actual thing in person so I don’t know whether I should thicken it.)
Note: please don’t roll forward the design when opening the assembly file
Author: Arjun Mandair Date
Review 1:
Hey Justin Liu , Thanks for the help! Took a look at the assembly and seems to be some confusion. We are essentially trying to bring in the alum_bend_mounts. Right now they are shearing as the mechanism turns due to the length. Bringing in these parts will lessen the shear the aluminum parts will experience. Currently, you have utilized the holes within the tripod, but the plan is to make new holes, where countersinks can fit. Essentially, we need to:
Increase thickness of the plate
Fit countersunk holes into the plate
redesign the aluminum bends to accommodate for this.
I have attached a picture / drawing for reference. Please feel free ask questions! Great work so far, and I appreciate the help!