...
Constraints | Written By | Append Date |
|---|---|---|
Made out of aluminum (0.064in for bent aluminum) |
| |
Machinable |
| |
Utilizes Countersunk Holes for Tripod Interference (Ensure Screw Head and Baseplate thickness is adequate) OR Utilizes tapped holes in baseplate (Ensure screw length is adequate) |
| |
Adheres to Servo Gearbox Dimensions |
|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
|
...
I like the green version, but I think the thickness of the baseplate can be knocked back down a decent bit, you do need to be thicker than the bolt head plus a bit, but not this thick. Otherwise looks good to me.
Author: Arjun Mandair Date:
CAD Review 3:
Hey Justin Liu , Please take a look at the feedback Alison provided in the confluence documentation. After this, and seeking another confirmation from Alison, you may:
Create the DXF Files
Edit the main assembly with your design
There is also one other thing I should mention (apologies for not doing this earlier). We have received dimensions for the servo gearbox as well. Please ensure your servo mount adheres to these dimensions (Note these dimensions are in inches). You may have to edit the C:\WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker\ANTENNA_TRACKER_02_SERVO_GEARBOX Assembly to do this. Great work so far! We're almost complete!
...