...
There is also one other thing I should mention (apologies for not doing this earlier). We have received dimensions for the servo gearbox as well. Please ensure your servo mount adheres to these dimensions (Note these dimensions are in inches). You may have to edit the C:\WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker\ANTENNA_TRACKER_02_SERVO_GEARBOX Assembly to do this. Great work so far! We're almost complete!
...
Author Justin Liu Date
Editing the Main Assembly
Based on dimensions Arjun provided, the servo gearbox container was modified (updated dimensions) to fit the new aluminium bend mounts.
There are ambiguous dimensions in the manufacturer’s dimensions; the figure below shows uses “(GUESS)” to indicate the unknown dimensions which can be changed later.
...
Due to the slight changes in dimensions, the mount is made slightly wider (from 35 mm to 40 mm wide) to adapt the increase of horizonal distance between left and right (AKA the 1.061 inch). Below is how the sub-assembly look like now.
Side note: The countersink holes position on the baseplate are constrained to the aluminium bend mounts.
...