...
I modified to be compatible with waterjet. Utilized 1/2in alum 6061 plate. Not too sure about the fillets. Any thoughts or concerns? You can check out in C:\WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker\ANTENNA_TRACKER_00_MAIN_ASSEMBLY.
...
Author: Alison Thompson Date
CAD Review:
I think the thickness of the stock can probably be brought back from 1/2” to 3/8” and the thickness of the profile can be knocked down to 1/8”. Maybe could make the fillets smaller but that doesn’t matter much, good job not putting fillets in the corners that interact with the servo. I’d also suggest you double check with the machinist on tolerancing for the waterjet so you’re sure the servo will fit in irl incase the part comes out oversized.