...
Changed thickness of the stock from 1/2in - 3/8in
Brought down profile to 1/8in
Wasn’t asked to do so, but I changed the M5 bolt from the backholder mount to the baseplate to M4. Please let me know if I should change this!
Double checked Justin Liu's changed in the gearbox dimensions. Seems good to me!
Rebuilt broken sub-assemblies. Fixed!
Spacing for servo gearbox = 34mm (gearbox thickness) + 0.01in (total) (aka +0.005in on each side)
I also spoke to machinist, and the waterjet is +-0.005 (which is why I increased servo cutout spacing to 0.01in total). Once approved I will order the sheet metal and screws.
...