...
I would move both dimensions of your detail view to the same side of the part
Make the thickness of the material a reference dimension because it’s not changing but is useful
Your section view scale looks to be the same scale as your main drawing but is labelled as a different scale
You don’t need the material thickness as a note if you have it dimensioned, if you would like it to be clearer that it’s 1/8th in you can edit the properties of the thickness dimension to have 3 decimal places for the imperial dimension (message in discord about fixing drawing template so you don’t have dual dimensions everywhere, but per the CAD guidelines we use them on dimensions where the imperial dimension is useful, which it is here)
Author Justin Liu Date
I’ve updated the baseplate drawing using the new WARG template
Revision 3: knowing this part is being manufactured using waterjet, I removed dimensions for hole locations.
The drawing template doesn't seem to update the model scale automatically when I change it, so I edited the scale in the title block manually.
I also created the drawing for the mount, it’s basically a copy how the previous mount drawing looks like.
This file is located in C:\WARG_CAD\COMP2024\Antenna Tracker\Yaw-And-Pitch Antenna Tracker\Drawings and DXFs
drawing named: ANTENNA_TRACKER_SERVO_MOUNT_03_STAND_EDIT.SLDDRW
pdf named: ANTENNA_TRACKER_SERVO_MOUNT_03_.pdf
...