Versions Compared

Old Version 21

changes.mady.by.user Hardy Yu

Saved on

compared with

New Version 22

changes.mady.by.user Hardy Yu

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleCard 2: Task 2

Test 1: Tuning

Procedure

Goals / Objectives

Knockoff Criteria

  1. Battery plugged in

  • Mission planner no pre-arm warning

  • make sure autotune is in one of the flight mode

  1. Bring the drone to the flightline

  • toggle safety switch

  1. Enable logging

  1. Take off the drone in Loiter

  • verify drone flight performance

  • Drone unstable

  • unable to establish VLOS

  • Timer threshold:

    • flight time exceeded 5 min.

    VBatt below safety threshold: 10V

    • QLAND immediately, disarm when landed.

    • Recover drone & gather state of batteries

    Lost link

    • Follow lost link procedures. Maintain vlos if possible.

    • Contact necessary local authorities.

  1. Engage Autotune

  • one axis at a time

  • Drone unstable

  • unable to establish VLOS

  • Timer threshold:

    • flight time exceeded 5 min.

    VBatt below safety threshold: 10V

    • QLAND immediately, disarm when landed.

    • Recover drone & gather state of batteries

    Lost link

    • Follow lost link procedures. Maintain vlos if possible.

    • Contact necessary local authorities.

  1. Switch Flight mode to Loiter to back to landing area

  • Drone unstable

  • unable to establish VLOS

  • Timer threshold:

    • flight time exceeded 5 min.

    VBatt below safety threshold: 10V

    • QLAND immediately, disarm when landed.

    • Recover drone & gather state of batteries

    Lost link

    • Follow lost link procedures. Maintain vlos if possible.

    • Contact necessary local authorities.

  1. Land the drone with autotune mode

  • to permanently save the PID value

  • Drone unstable

  • unable to establish VLOS

  • Timer threshold:

    • flight time exceeded 5 min.

    VBatt below safety threshold: 10V

    • QLAND immediately, disarm when landed.

    • Recover drone & gather state of batteries

    Lost link

    • Follow lost link procedures. Maintain vlos if possible.

    • Contact necessary local authorities.

  1. Disarm the drone

  • disarm the drone, Toggle safety switch

Expand
titleCard 3: Task 13

Test 1: Test Basic Obstacle Avoidance

Procedure

Goals / Objectives

Knockoff Criteria

  1. Set waypoints

  • Create a simple path for the drone to follow.

 

  1. Run main obstacle avoidance script

  • Ensure no errors.

 

  1. Set up the obstacle in course

 

 

  1. Battery plugged in

  • Mission planner no pre-arm warning

  • make sure AUTO is in one of the flight mode

  1. Bring the drone to the flightline

  • toggle safety switch

  1. Enable logging

  1. Arm the drone and set mode to AUTO

 

 

  1. Let drone start flying through waypoints in AUTO

 

  • Drone unstable

  • unable to establish VLOS

  • Timer threshold:

    • flight time exceeded 5 min.

    VBatt below safety threshold: 10V

    • QLAND immediately, disarm when landed.

    • Recover drone & gather state of batteries

    Lost link

    • Follow lost link procedures. Maintain vlos if possible.

    • Contact necessary local authorities.

  1. Wait for drone to approach the obstacle

  1. Ensure that drone stops and enters LOITER mode

  • Ensure the drone stops ~10m away from obstacle.

  • Ensure drone switches to LOITER mode upon detecting obstacle.

If the drone does not stop within 10m of the person and obstacle:

  • The person holding the obstacle steps out of flight path immediately.

  • Pilot manually intervenes and skips to Step 13 (landing and disarming drone).

  1. Remove the obstacle from the flight path and ensure the drone reenters AUTO mode

  • Ensure the drone resumes its mission.

  • Ensure drone switches to AUTO mode upon obstacle removal.

If drone does not resume to landing waypoint

  • Pilot manually takes over and proceeds to Step 13 (landing and disarming drone).

  1. Drone hovers over the 2nd waypoint (the landing waypoint)

  •  Ensure drone completes the mission.

 

  1. Pilot manually intervenes and lands drone

 

 

  1. Disarm the drone

  • disarm the drone, Toggle safety switch

...