...
1 3-pin jst-gh (1.25mm spacing) connector
1 2-pin jst-gh (1.25mm spacing) connector (optional as we tentatively do not need the OSD pins; video goes to the Lumenier switcher board)
Lumenier Camera Board
Either
1 3x5 2.5mm spacing/pitch upright male or female header to connect to the available pin holes on this board and a female or male connector on the unified vtx board respectively.
B5P-SHF-1AA JST Sales America Inc. | Connectors, Interconnects | DigiKey
This would allow for the lumenier board to be soldered directly to the board.
3 5pin jst-xh (2.5mm spacing) connectors but same configuration as 1st option.
B5B-XH-A JST Sales America Inc. | Connectors, Interconnects | DigiKey
SM03B-GHS-TB JST Sales America Inc. | Connectors, Interconnects | DigiKey
If these are chosen, the lumenier board would have separate pin headers soldered to it, and then have jst wires connect the lumenier board pin headers to these headers on the U-VTX board.
Soldering to the pads and breaking away the bottom portion to save weight.
Female header on board SSW-105-01-S-T Samtec Inc. | Connectors, Interconnects | DigiKey. Solder male header pins to the lumenier board for easy connection. Mechanical asymettry or imbalance should be fine.
The first and second options make it easier to plug and play, but it has added weight. Soldering option is more prone to error but has less weight. A quick Google search showed that similar solutions have similar 2.5mm pitch pins instead of jst headers.
...