...
kinda made assumptions before reading this and now everything makes sense
pins should be chosen based on what voltage divider ranges will be
because thermistor and vbatt voltage dividers have varying VIN/R1 values, they should be on FT pins (5V tolerant) because it gives more room
ranges from 3V-7.3V
LDO
putting two LDOs in series to drop 6V-5V, and 5V-3V3
for 6V-5V
richtek-usa-inc/RT9167A-33GB/2546721for 5V-3V
reuse LDO from ESC CAN Adapter
LED
not entirely sure what goes into selecting addressable LEDs, are there any firmware impacts i should be considering?
https://www.digikey.ca/en/products/detail/harvatek-corporation/T3A33BRG-H9C0002X1U1930/15930508
seems fine?
VIN is 3.3-5.5 but abs max is 6.5V so can be run on 3V3 rail
it’s kinda chonky
going with the one from SSD for now, using logic modifier also from SSD
wanna know more abt how the logic thing works
Simulations
Input filtering sim
...