Page Comparison

Fixed Wing

• Timeline thoughts

  • Start manufacturing halfway thru the term.- Smile

  • Push pple to work faster, set realistic deadlines for projects. Check up on people more. - Smile

• what’s needed from other subteams?

  • Patience. I think all avionics are finalized, so not much else needed. - Smile

Pegasus 2

• What’s needed to finish it?

  • Attaching the landing gear to the x-frame

  • Pixhawk mount ready, need to 3D print stand-offs

    • Can we use those gummies here

  • print all electronic cases, ensure we have all bolts and nuts needed to mount PCBs

  • Weatherproofing needs to be manufactured. Thermoformed solution can be as heavy as 400g. Another option is to make a dome out of frame, maybe balsa wood or LW PLA and wrap the frame w plastic. I feel like we have to be realistic here and be willing to add minimum 300g.

    • Yea the extra weight is worth it for weatherproofing -Daniel

Tracking Ant

• ready to FT?

  • Technically, yes. However, mech would like to do a design review to identify and fix some design problems

    • Proper supports to maintain the antenna’s pitch level

    • Baseplate not very steady. The normal vector of the top face of the plate can deviate from the yaw axis.

• Thoughts on taller towers and new antennas

Work Sessions

• Wanna go hard on the work sessions esp. on manufacturing side. Smile kinda slacked off during the summer because no manufacturing needed to b done and people can just work on CAD from home. People aren’t as involved when there aren’t work sessions. I can take the responsibility of running these sessions Saturday mornings - Smile

• It’ll be easier with both of you onsite. -Daniel

Culture around nitpicks