...
I’m thinking of just a simple sheet metal plate with a right angle bend bolted to the 30.5x30.5mm grid on the frame, open to other ideas if you have them though!
Author: Evan Janakievski Date:
First Glance Notes
I am thinking the flanges on the side could be removed and the part could be squared off for weight savings. If we see it needs more stability could be added in the future
Will need to 3D print a mount for the camera that then mounts to this. Looks like there is space reserved above the motor for that currently. Vibrations may be a concern, but can be addressed later if a major issue
Not sure if there is more possibility for weight savings, which there may be but Alison Thompson may have thoughts.
...