...
PicPilot Switching Power Supply Testing
Location | Bay |
---|---|
Frequency Range | 426-442Mhz |
Condition | Picpilot off, rf explorer antenna right next to and parallel to the board |
RF Explorer Antenna | Retracted |
Max Level | -85.9 |
Max Hold Level | -85.9 |
Max Level Freq | entire range |
Image |
Location | Bay |
---|---|
Frequency Range | 426-442Mhz |
Condition | Picpilot ON, rf explorer antenna right next to and parallel to the board |
Notes | Max levels stayed the same, however average RSSI was way higher near 435Mhz. Note that this is when the antenna is RIGHT next to the power supply |
RF Explorer Antenna | Retracted |
Average Level | -86.23 |
Max Hold Level | -83.50 |
Max Level Freq | 435.875Mhz |
Image |
Dragon Link Testing
Location | Bay |
---|---|
Frequency Range | 426-442Mhz |
Condition | Dragon Link On, Lowest Power, 5ft away |
Notes | Increasing power level created RF overload |
RF Explorer Antenna | Retracted |
TX Antenna | 0.7dbi 398-428Mhz range |
Max Level | -18.6 |
Max Hold Level | -18.6 |
Max Level Freq | 437.10Mhz |
Image |
...
PicPilot Switching Power Supply Testing
Location | Bay |
---|---|
Frequency Range | 899-960Mhz |
Condition | Picpilot off, rf explorer antenna right next to power supply and parallel to board |
RF Explorer Antenna | Retracted |
Max Level | -85.83 |
Max Hold Level | -85.86 |
Max Level Freq | Entire range (noise) |
Image |
Location | Bay |
---|---|
Frequency Range | 899-960Mhz |
Condition | Picpilot ON, rf explorer antenna right next to power supply and parallel to board |
Notes | Average RSSI levels again higher, though not as high as 433Mhz band |
RF Explorer Antenna | Retracted |
Average Level | -91.95 |
---|---|
Max Hold Level | -89.95 |
Max Level Freq | 911.527Mhz |
Image |
Xbee Testing
Location | Bay |
---|---|
Frequency Range | 899-960 |
Condition | Xbee ON, 5ft Away |
RF Explorer Antenna | Retracted |
TX Antenna | 3dbi 868-928Mhz Antenna |
Max Level | -70.01 |
Max Hold Level | -70.01 |
Max Level Freq | 904.991 |
Image |
...