...
Big Project | Project | Project Manager |
|---|---|---|
2024 Fixed Wing | Frame | S24:Alison Thompson F24: Evan Janakievski |
Task Description
Designing a mount for the front motor and FPV camera on the fixed wing plane.
Constraints
...
Constraints | Written By | Append Date |
|---|---|---|
Mount https://store.tmotor.com/product/at3530-long-shaft-fixed-wing-motor.html to the front of the plane’s frame, shaft facing forwards |
| |
Mount https://rotorvillage.ca/caddx-baby-ratel-2-fpv-camera/ facing forwards on the same part as the motor mount |
| |
Mounts to existing frame plate |
| |
As light as possible |
| |
Mitigate vibration on camera if possible (this isn’t the top priority but nice to have) |
|
...
Need to filet the corners on the mount once the design is finalized.
I prefer this squared off. I can adjust the plate of the frame if there is some overhang from this that causes issues
The flange the motor will be mounted to can be cut down and not be as thick. Whatever is necessary once you see the motor mated to it
...
Author: Evan Janakievski Date:
Spoke with Smile about mount. Thinking that moving it down would be best to ensure we don't have as much vibe. This may also benefit us as it is more level with COG
New design request would use two brackets, one below main plate and one above. The top bracket would have space for camera. See below
Follow similar shape to current design
...