...
Lift + cruise
Electrical needs:
Design/source a controller that stops the props at a particuar angle to minimize drag during horizontal flight
Tilt rotor
Needs large props
...
Things I recall from comp
...
One soln is what Carleton did with its raised/triangle rear stabiliserstabilizer on their craft, “Apogee“, decreasing wind effects and making the line centre of mass angled. The rear motor did not have to do as much.
Note that Carleton’s craft was really light. Don’t turn with too small a radius at high speed or the craft will be ripped apart in mid-air.
Side note: Guy from Lockheed mentioned that winged mode flight requires a forward center of mass to prevent pitching backwards
...