...
The front landing gear had cutouts applied so that the weight of the part can be reduced.
Objective of Sim
[The goal of the sim is to ensure that the cutout holes do not reduce the integrity of the part enough so that it would fail on landing.]
Simulation Setup
Assumptions and Preliminary Calculations
...
Trial # | Maximum Stress (MPa) | Min Safety Factor | Screenshot |
|---|---|---|---|
1 | 138.17 | 1.72 |
    |
2 | 154.83 | 1.3402 |
     |
3 |
|
|
Could also include minimum safety factor.
...