Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleZeroPilot M2/M3

Drivers

  • IMU driver - Kelvin Feng

    • PR received approvals and ready to be merged

 

  • Sensor Fusion - Polly Liu & Liam Suter

    • prototyping with bmx160

    • Code tested and functioning on arduino

      • Need to calibrate the sensor as it’s not giving reasonable data currently

      • Starting code for the IMU on the STM32 in the meantime

 

  • GPS

    • new task opening?

 

Attitude Manager Anthony Luo

  • Same as last week. Waiting on sensor fusion and IMU

System Manager Hardy Yu

  • no update

 

Telemetry Manager Yarema Dzulynsky

  • Created proposal to simplify remote TM development

Path Manager Ayoung Eun

  • Ideation Code Currently working to determine the required altitude and were wondering if we have a fixed wing specification available still (When we test it, would we still use that foam plane?). This would help us figure out the optimal altitude and speed for takeoff and landing.

  • Just to double check, sensor fusion still works right? I know it’s in ZP 3.5 but just to double check if it still functions properly.

 

Infrastructure

Core Dump Kabir Verma

  • I wanted to download the testing rig and kinda stuck on the versioning and ideal setup so wanted some help there.

 

ZP Validation Image Ethan Leung

  • Fake Arduinos arrived and they are working. Running into some troubles during testing but not blocked

  • Worked on the ADC tests cases.

ZP3.5 M2 Bring-Up Sherry Lai

  • Was able to properly build ZP3.5 on laptop

...

Expand
titleCAN Projects

ESC (Jeffery Zhen)

  • continuing to work on the CAN component

  • need to test DShot by plugging in a motor

 

Servo Tharun Ganeshram Fion Lin Herman Gahra

  • Larry Pan Modifying code to handle interrupts LIFO instead of FIFO

 

Sensor Cluster Roni Kant

LED Board Folarin Fatola (Unlicensed)

  • Worked on debugging the CAN integration code

  • TODO: Enable one lighting board node to act as a master for the rest of the lighting boards

6s Power Module Bryan Ma Harry Chen

  • The doc for the CAN interface has definitely helped a bit in understanding the CAN architecture, and how it’s used in conjunction with DroneCAN

  • We will still need to learn more about DroneCAN and Nucleo L5’s CAN connectivity in general, before we know how to receive a message from the FC. After that we’ll continue

Expand
titleGroundside Infrastructure

Tracking Antenna Omer Sajid Jeremy Zheng

...