Comp Design

Alison Thompson

• Both payloads ready for manufacturing, order has been placed for parts

• Megan Spee list of parts that need to be made?

• Angled landing gear almost done, finalizing angle and adding stopper to account for unknown exact barrel dimensions

Eclipse (Fixed-Wing) Airframe

Evan Janakievski

• Updates on manufacturing? What needs to happen this weekend?

  • Will get parts needing to be water jet submitted today or tomorrow

  • Spacers need to be machined as well as spars (not sure if spars are finalized from everyone)

    • Drawings for spacers need a final look over but should be fine, simple lathe task

Tracking Antenna

FuselageLanding Gear

Ben Lovegrove

Empennage

• New servos ordered.

  • Lighter than what was planned initially. 1 servo for each side for the elevator, 1 servo for the rudder.

  • Mounted inside the stabilizers

• Image Added

Eclipse Wings

Nathaniel Li

• Ben Lovegrove updates on cheesed spar?

• Agapa GoombsKeegan Jeewan Sam Wong aileron → PDM not working

• Keegan Jeewan pitot tube no progress → PDM

Ground Station

Smile Khatri

• Sam Sayad Sacha Missaghian any updates on the hardware plate

Peggy 2 Jig

Victor Sun Shawn Henry Dragon

• Please add updatesWe have the plan we were just waiting for Victor Sun to get PDM working, seeing as that hasn’t happened CAD will be done these next couple days

• We are going to need new holes cut into the baseplate on either side of each battery for the jig

Mech leadership roles

Smile Khatri

• I am stepping down as a mechanical lead at the end of next term. Please fill out the form below if you are interested in becoming a mechanical lead, or a project manager!

• Plan is for the new lead to be active next term

• https://docs.google.com/forms/d/e/1FAIpQLSeOJ1WSgnRcaD1U88dHK06TOHNmZSJtxSjmqRjy2582Gvpi2g/viewform?usp=sf_link