...
Procedure
Step 1:
Set up your steciling stencilling station!You want to surround
Get the board that will be brought up and place on a flat surface.
Surround your board with other PCB’s
...
or straight
...
-edged objects to keep it in place.
Tape down all the surrounding PCB’s
...
to lock the position of the PCB down.
Make sure it is completely level with the table and secure!
Common Mistakes
Not making the PCB enclosure tight enough (the board
Applying too much solder paste to the stencil can cause…
Peeling off the stencil from the enclosure