Product Links
Receiver:
http://www.immersionrc.com/fpv-products/ezuhf-8-channel-diversity-receiver/
https://hobbyking.com/en_us/immersionrc-ezuhf-8-channel-diversity-receiver.html
JR Transmitter:
http://www.immersionrc.com/fpv-products/ezuhf-jr-module/
https://hobbyking.com/en_us/ezuhf-433mhz-direct-fit-jr-module-for-the-9xr-and-taranis-uhf.html
Regular Transmitter:
http://www.immersionrc.com/fpv-products/ezuhf-500mw-transmitter/
https://hobbyking.com/en_us/immersionrc-ezuhf-transmitter-600mw.html
Firmware
To configure both the TX and RX modules, hook them up via the usb cable to your computer. You'll need to use the ImmersionRCTools configuration utility, which also has the ability to flash the modules with the latest firmwares.
ImmersionRCToolsSetup_v1.42.5.zip
The currently loaded firmware on all the modules is v1.53. This can be downloaded below:
Fail-safe
The system DOES NOT SUPPORT disabling PPM and PWM outputs as a fail safe. This means the disconnect detection methods that the picpilot uses will not work when using this radio system. Therefore its not
recommended to use it during flight tests, although it can be used for development purposes.
Resources
| View file | ||||
|---|---|---|---|---|
|
| View file | ||||
|---|---|---|---|---|
|
PPM Oscilloscope Results:
...