Versions Compared

Old Version 17

changes.mady.by.user Aidan Bowers

Saved on

compared with

New Version Current

changes.mady.by.user Daniel Puratich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Tip

Make sure to update the Title following the format “Jan 01, 2020 Flight Test”

Table of Contents

📋 Flight Preparation

Requested by:

Comp Team

Required Sub-teams

  •  Comp Team

Requested Date

Location and Time

CED Alma

Summary & Goals

Endurance testing on Icarus

Approved?

Yes

🔧 Pre-Departure Checklist

Expand
titlePre-Departure Checklist
  •  Check battery status
    •  Charge if required, otherwise place into flight box
  •  Systems test
    •  Check flight controller orientation
    •  Check motor spin & rotation direction
    •  Check transmitter mappings
    •  Verify communication links (VTX/RX, Controller, Groundstation)
    •  Verify the mission planner is logging data
  •  Only attach props directly before flight (keep off at all other times)
  •  Mission Briefing
    •  Plan of action
    •  Delegate and brief on flight line roles
    •  Key flight characteristics to observe
    •  Key system characteristics to observe
    •  Measurements to be made

🚩 Pre-flight Safety Checklist

Expand
titlePre-Flight Inspection
  •  Air Frame
    •  Check all antennas, ensuring they are secure and in good condition
    •  Check the battery emplacement and secure attachment and ensure there are no cracks
    •  Check that all lights are operating normally
    •  Check that all sensors are secured and clear of any obstructions
    •  Check that the GPS is receiving satellites and providing a navigation solution
    •  For fixed wing aircraft, Check:
      •  Wings, ensuring they are securely attached to fuselage
      •  Wing leading edge surfaces
      •  Top and bottom of wing surfaces
      •  Wing tip surfaces
      •  Read of wing and all flight control surfaces for freedom of movement, security and any skin damage
    •  For rotary aircraft:
      •  Inspect top and bottom of air frame arms for cracks, loose parts, or signs of damage
      •  Check fluid levels and ensure no leaks if applicable
  •  Control Surfaces
    •  Ensure Elevator moves correctly
    •  Ensure Ailerons move correctly
    •  Ensure Rudder moves correctly
  •  Landing Gear
    •  Check landing gear is secure
    •  Inspect skids or wheels, especially attachment points
  •  Propellers / Rotors
    •  Ensure propeller is secured
    •  Check for nicks, chips or cracks
    •  Ensure prop direction is correct
  •  Batteries
    •  Inspect to ensure there is no signs of swelling, external leaking or other defects
    •  Battery wiring and connectors from the battery are connected securely
    •  Batteries (and spares) are adequately charged
    •  Wires are not pinched
  •  Control Station / Receivers / Transmitter
    •  The battery and spare batteries if required are adequately charged
    •  Control Station device and cables are properly connected and functioning
    •  All flight interfaces are functioning normally
  •  Safety
    •  Good visibility and safe wind speed
    •  Surrounding is free of obstacles
    •  Crew far from drone
    •  General Site Survey
  •  Ground Recording / drone footage on
  •  Autopilot
    •  Control surfaces respond to autopilot in the correct manner
    •  Transitions between flight modes have expected effect
    •  Return-to-home systems, if present, have been configuredFlight Test Post Mortem

Action Items

  •