...
PVC: cheap and not recommended as it kinks easily
Poly: flexible and resistant to vacuum
Nylon: disposable and not the best for the job, but cheap to buy and easy to use with barbed fittings
Permanent: better quality and can be used with quick connects
In the long run better to look into
...
Infusion Connector for use with 1/2” OD Tubing→ WebVenture (compositescanada.com) → can be reused a couple times → $11 each
Order 4 → $44
9.89 EA with discount → $39.56 for 4
Poly-Tubing 1/2” OD - 3/8” ID Cut Yards → WebVenture (compositescanada.com) → $2.13/yd
Order 10 yards → $21.30
1.91/yd with discount → $19.1 for 10 yards
Spiral Tubing 1/2” OD Cut Yards → WebVenture (compositescanada.com) → $5.27/yd
Order 4 yards → $21.08
No discount on this
Sealant Tape 25' → WebVenture (compositescanada.com) → $10.80
$9.18 with discount
Vacuum bag Cut Yards 60” width → WebVenture (compositescanada.com) → $4.99/cut yard
Order 4 cut yards → $9.98 19.96
$4.24 with discount → 16.96
Infusion Mesh Cut Yards 60” width → WebVenture (compositescanada.com) → $11.45/cut yard
Order 2 cut yards → $22.90
$10.30 with discount → $20.60
Line Clamp from Composites Canada is $56 can probably find another solution
Total Cost: $130.06 140.04
Total with discount: 126.48
Epoxy and Hardener → 1 new message (compositescanada.com)
$289.43 for 11lb
Epoxy and Hardener → cheaper version and uses same epoxy as our past wet layups
WebVenture → $101.44 for Qrt kit
WebVenture → $26.27 for hardener only