Page Comparison

Material

• Carbon fiber sheets are most common - light and durable

  • Conducts electricity so everything needs to be well insulated

  • Blocks signals so need to place antenna in a good location

• HDPE also an option but not as strong

Arms

• Easier to fix aircraft (and cheaper) if the arms are replaceable

• Having unibody (arms not removable) could be less machining

Shape

• good site: https://www.getfpv.com/learn/new-to-fpv/all-about-multirotor-fpv-drone-frame/

6 Arms

https://www.researchgate.net/publication/303346487_Design_and_Development_of_Hexa-copter_for_Environmental_Research

https://www.diva-portal.org/smash/get/diva2:1216528/FULLTEXT02.pdf

4 Arms

Dead Cat

• allows space for a camera at the front (and no rotors in the way)

True X

• Same stability on every access since the motors are all at the same distance

• More aerodynamic

Wide X

H Shape

• Wider so it could make fit the drone lighter/smaller while still fitting a grabber and camera on the wide axis

Image Removed

• more easily

Image Added

Sites:

https://dronenodes.com/drone-frame-racing-freestyle/

Stages

2 Stage:

• Can carry more stuff

• Could put a nice 3D print insert to enclose everything

Image Added