...
Big Project | Project | Project Manager |
|---|---|---|
Pegasus | EP2 EP1 dual Case |
Task Description
Currently, our EP2 EP1 board (which establishes ELRS connection to allow remote control of the drone) is taped to the top x-frame plate. We want a better way to secure EP2EP1.
The task is to design an enclosure which will shield EP2 EP1 and secure it properly onto the x-frame plate.
...
Constraints | Written By | Append Date |
|---|---|---|
ELRS antennas must be exposed | June 12, 2024 | |
Hole/slot for power cable | June 12, 2024 | |
Passive cooling by airflow | June 16, 2024 | |
Mounts to a 30 x 30 grid pattern |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Tech Director | Answer questions regarding EP2 and add constraints if needed |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
link to asana task assigned | Date assigned |
Task Progression/Updates
Author:
...
Pranav Bommireddipalli Date:
...
2024/
...
UPDATE TITLE
...
06/25
Created Initial Design
...
Made design compact to allow for easier mounting of the waterproofing dome: Weatherproofing Dome. Current plan is to 3D print it.
2 part design as of now, but a 1-part design where the EP2 slides in might be worth exploring as it would be a lot smaller.