e
Big Project | Project | Project Manager |
|---|---|---|
2024 Fixed Wing | Frame | S24:Alison Thompson F24: Evan Janakievski |
Task Description
Designing a mount for the front motor and FPV camera on the fixed wing plane.
Constraints
...
Constraints | Written By | Append Date |
|---|---|---|
Mount https://store.tmotor.com/product/at3530-long-shaft-fixed-wing-motor.html to the front of the plane’s frame, shaft facing forwards |
| |
Mount https://rotorvillage.ca/caddx-baby-ratel-2-fpv-camera/ facing forwards on the same part as the motor mount |
| |
Mounts to existing frame plate |
| |
As light as possible |
| |
Mitigate vibration on camera if possible (this isn’t the top priority but nice to have) |
|
...
I agree with Evan, side flanges as implemented here aren’t really helping
How does the camera mount to this? a 3d print?
Can this be added to the fixed wing main assembly with the motor mated to it in the way you’re envisioning?
All corners should be filleted
idk simulations but Evan Janakievski may be able to help with a sim to see if we can expect this to bend with no supports
can look at sheet metal or 3d printed braces to support the motor mount from behind if we expect it to bend
once in main assem and camera mount is in there we can see if we can reduce the height of the top flange/round it off
I think this part should be a part of the frame assembly, unless others oppose please move there and change naming accordingly
part should be the thickness of 14ga aluminum (~1.63mm) (that’s what we can bend)
make sure bend radius is at least equal to the material thickness
Author: Evan Janakievski Date:
Need to filet the corners on the mount once the design is finalized.
I prefer this squared off. I can adjust the plate of the frame if there is some overhang from this that causes issues
The flange the motor will be mounted to can be cut down and not be as thick. Whatever is necessary once you see the motor mated to it
...
Author: Evan Janakievski Date:
Spoke with Smile about mount. Thinking that moving it down would be best to ensure we don't have as much vibe. This may also benefit us as it is more level with COG
New design request would use two brackets, one below main plate and one above. The top bracket would have space for camera. See below
Follow similar shape to current design
...
Author: Evan Janakievski Date:
Removed excess material to shave off unnecessary weight
Adjusted the camera mount to be similar to current one on pegasus
Changed all clearance holes to use hole wizard
Wires from motor will wrap below the bottom mount.
Not sure about FOV of camera and if the motor would be visible
Can move it to be further ahead or move it below
...