Item | Presenter | | |
|---|
Frame | Conall Kingshott | We’ve decided no change to cover threads on bolts EE is looking at lengthening wires on the drone Getting arms re-installed on the drone for open house & flight test Dec 2 
| |
Battery Shrouds | Smile Khatri Andy Zhang | Carbon fiber layups were completed last Saturday. Brian at E3 said cutting it with a bandsaw would do and the piece was too flimsy for the waterjet and a waste of time / resources (Andy) Took Friday to cut all the carbon shrouds so its now 4 pieces that just needs to be sanded, cleaned (can the wax be washed off?) and then epoxy it onto the PLA clips. If someone has time, we could just tape the carbon plates onto the clips to test how it feels before doing a more permanent solution We have an instant set epoxy for finally attaching them together in the chemical box. We should not use aeropoxy
| |
Cabin
| Alison Thompson
|  
Who is interested in helping with layups? We will be doing some on Sunday November 26th at the mech work session (@2pm?) Feel free to come if you’re interested! You don’t need to have any experience, those there will teach you! Other updates? | |
Admin Interlude | Conall Kingshott | DM Conall Kingshott if you were in the RPC weekend of the 11th/12th | |
Open House | Conall Kingshott | This is running Saturday all day Registering as an actual volunteer was due a while ago, but pretty sure we can still show up and talk to people, just wont have a name tag. Conall was completely wrong, please don’t come unless you’re officially volunteering
| |
New Task ! | Alison Thompson | Looking for someone to design a 360 Lidar mount for Houston, doc and asana task on the way, I’ve been busy, doc from Anni for now: Houston 360 lidar mounting requirements | |
Work Session | Conall Kingshott | | |