...
The cutouts on the top part is really nice, maybe we could add them on the bottom part too
Pins to align the board is a smart idea! But you’ll need some tolerance for them (right now the hole on the board and pin are the same size, but when you 3D print it won’t fit properly). The sizes on the original case CAD is 1.3 mm in diameter for the pin (red section below) and the hole on the top mount is 1.4 mm in diameter. We can try these dimensions out first and print to see how it fits
...
Task Progression/Updates
Jievan Tapajna Date: 2024/11/24
Mount Design Progress
Updates have been addressed aside from adding a second pair of M3 holes as the length of the board is approx 31.5mm which is longer than the 30.5x30.5 grid and would require the mount to be much larger.