...
Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | Monster Mount Modification |
Task Description
NEW TASK
We now want to add the IR camera to the monster mount on the arm, the link to this camera is here: https://www.digikey.ca/en/products/detail/raspberry-pi/SC0873/17278646
PREVIOUS TASK
For comp 2024, a mount was designed to accommodate the $200 CV camera, 1D lidar, FPV camera, and an optical flow sensor. The mount was not used because the CV camera and 1D lidar was removed from Pegasus 1. This year, we want to mount the CV camera to test autonomous functions.
...
Constraints | Written By | Append Date |
|---|---|---|
IR camera is not obstructed by landing gear or payload |
| |
IR camera port is closer than 500mm from the port of the raspberry pi on the drone (ask electrical for specific pi location) |
| |
No part of the drone is within a 40 degree field of view of the $200 CV camera (refer to the CV camera documentation for specifics) | 2024 - 09 - 14 | |
Mounts to the front left arm of the drone using a M3 bolt | 2024 - 09 - 17 | |
The mount is not wobbly (this was an issue with the previous monster mount) | 2024 - 09 - 14 |
...