...
The 9V board is configured with a minimum of 2A, and a maximum of 5A current. This means as low as an 18W power adapter (commonly shipped with smartphones) can work with this board.
NOTEIMPORTANT: By default, all of the boards will draw 5V until PD arbitration is complete, due to dead battery mode. If your use case must avoid undervolting, connect the USB-C Sink device to the source, wait briefly, and then connect your device with the XT30.
...
The TPS25730 can provide debug and diagnostic information through the interface.
NOTE: The arbitrated voltage of the device is NOT configurable over I2C.
...