Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Slicer: https://ultimaker.com/software/ultimaker-cura?utm_source=cura&utm_medium=software&utm_campaign=cura-update-download

Suggested Settings

ABS

  • Extruder Temp: 220 C

  • Bed Temp: 90 C

  • Flow: 110%

Print not printing well?

  • If the first layer isn’t sticking:

    • Recalibrate it until the filament is coming out the correct amount and adhering to the build plate

    • Print with a raft

  • No labels