2023-03-27 Meeting Notes catjam

Cornflakes

Alison Thompson

Updates:

• flew, didn’t crash, nothing broken!

• boxtube good stiffener

• shout out to Nathan Green for the sick control horns that bolt in

Competition Frame updates

Conall Kingshott

Megan Spee

this didn’t exactly happen

**Everything is now urgent. If you can’t complete it, you need to tell me so I can re-delegate it**

Fuselage skin - Alison Thompson / Conall Kingshott

• sorted mostly, interference is fixable

• camera mounts in the bottom: holes exist

• cabin in general, fixed interference over weekend

• all fits together relatively well

  • EE can start wiring!

Avionics bay - Conall Kingshott

• dremeling to get rid of interference

• can be moved back-forth for CoM adjustments

• possibly need standoffs for velcro attachments

• * this is a last minute adjustment thing *

Landing gear - Alison Thompson

• printed and assembled

• little drop test maybe upcoming

• see how cabin interfaces make it sit

Nose/tail - Andrew Wright

• testing went well? for weatherproofing?

• cured

• testing - water doesnt seem to absorb, reasonably waterproof

• solution: add more epoxy, test indicates this works

• take a look at sanding - test this before applying to nosecone

Bay door - Vishal Jayakumar

• steps are connected to door

• attached to cabin.

• hinges done Alison Thompson , superglued in, gorilla taped in. looks secure enough right now without bolting

• interference when opening fully

• interference with spar when door is closed

Motor Mounts - Andrew Wright

• printed in CF PETG today

• to be installed

Passenger Cabin Seats/ Interior - Sohee Yoon , Luke Johnston

• Prelim cad

• pull up the photos?

  • think about how this will be printed

  • sohee is onsite, luke is not, theraband will need to be cut and chairs will be printed. prototype prints should be upcoming mid-this week

• press fit? 0 tolerance

• try for 1 piece

Other electronics mounting

• FPV camera for nose cone - Megan Spee

  • cad done, prototype printed, needs to be printed in CF and mounted to nose. awaiting final nose cone coating/assessment

• Sensor stack @ bottom of fuselage - Megan Spee

  • WIP

• Airspeed sensor mount to nose cone - Megan Spee

  • cad done, prototype printed, needs to be printed in CF and mounted to nose. awaiting final nose cone coating/assessment

• ESC cases - Nathan Green

  • printed prototype, test fit?

• RFD900x case - Andrew Wright

  • prototype design, printed

  • will update and reprint, check fan sizing

• VTX case - Andrew Wright

  • prototype design, print soon

Go to the icarus syncs (TUES 9pm) to stay up-to-date cross subteam

the mechanical issue with the icarus/ cornflakes model

The push prop doesn’t have enough untampered airflow

cornflakes was not able to generate enough forwards thrust to successfully transition to fixed-wing flight on weekend

Flight tests and comp simulations

Megan Spee

Static antenna

Megan Spee Andy Zhang Jason Li

VTX tower done CAD

telemetry tower getting polished up

manufacture to follow

acrylic plates to be laser cut - RPC

3D print queue

Megan Spee

https://docs.google.com/spreadsheets/d/1Q_br9GBNeDQyoC_tTMmVR7JwFED_s-bB0_7Q1zc3o6I/edit?usp=sharing

Now there’s a print queue folder for STLs and GCODE files in grabcad

omnipresent safety reminder

composites room for any fiberglass and carbon fiber (CF).

PLEASE be safe lol. these are carcinogens

don’t do this if you don’t feel safe!
paint room for spray paint!