Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Slicer: https://www.prusa3d.com/page/prusaslicer_424/ for Prusa MK3

Suggested Material Configurations

These can be found in GrabCAD: COMP2023 → Phoenix → Configs

You can download the file and add the parts you want to print. You can also open a new Prusa project and import the configuration from this document into your current one.

ABS BENCHY SPECIFIC:

Template on GrabCad: Comp 2023 → MECH → 3D Printing → ABSBenchySettings

  • You can download this file and replace the benchy with the part you want to print

Print Troubleshooting

  • If the first layer isn’t sticking:

    • Clean the build plate with rubbing alcohol

    • Clean the build plate with soap and water, dry well

    • Clean the build plate with acetone (PEI sheets only)

    • Print with a raft

    • Print the first layer at a slower speed

    • Recalibrate it until the filament is coming out the correct amount and adhering to the build plate

Updating Firmware

You need a USB B plug to update the firmware. Look in the cable bins on the electrical shelf to find one, and follow this youtube tutorial: https://www.youtube.com/watch?v=h4IrBGgJa90

  • No labels