\uD83D\uDDD3 Date
30/05/2023
\uD83D\uDC65 Participants
\uD83E\uDD45 Goals
Discussion of Previous Antenna Tracker Design
Prior Goals
Unfinished Tasks
Mechanical Constraints of Current Design
Next Steps
\uD83D\uDDE3 Discussion topics
Time | Item | Presenter | Notes |
|---|---|---|---|
Introduction | Welcome!
| ||
Goals, Constraints, and Encountered Problems | Picture of the Current Design 🔥  What were you trying to achieve with the project?
What were some problems or obstacles you faced during the design process? | ||
Project State & Unfinished Tasks | What is the overall state of the project? Are there any unfinished parts on the current design (For example, I noticed some unfinished sketches in the CAD)?  Are there any unfinished tasks in relation to the project? Was there any testing done or prototypes built on the current design? | ||
Design Decisions | How did you accommodate for the adjustable stand (noticed a bearing underneath with holes)?  Is there an adjustable stand currently built? Does the current antenna tracker design accommodate for it? Noticed that most of the material was designed for 3D printing (ABS). What is your reasoning for that? | ||
Tips and Innovations Ideas | Little experience with Mechanical Design. Do you have any tips for me on how to properly structure my design process and make concrete decisions in relation to this project? Having worked on the project already, do you have any innovative ideas? Is there anything I should try to investigate or work on immediately? Are there any tasks that are unfinished that I should be aware of? |
- Nathan Green Ansys licenses
- Conall Kingshott Drawing Template