Requesting team: Leads/Directors/Comp 24 team

Items TBD:

Test Procedures/Test Cards

Sections for flightline team to fill out:

Incident Procedures, communication preferences.
Test Cards

📋 Admin Preparation

Flight test approved

Requested By	Megan Spee
Sub-Team Review (To be checked once reviewed by sub-team representative)	Mechanical Electrical EFS Autonomy Operations
Date of Request	04 Apr 2024
Goal Summary	Test full pegasus system Test groundside tracking antenna software
Status?
Desired Airframe	Pegasus, Houston
Desired Date(s)	April 6

🥅 Testplan - to be filled out by requesting team

Create ONE table per test-item. Eg: “Landing pad images over asphalt”, “landing pad images over grass”, “landing pad images over grass, high” should all be unique tables.

Use each expand to capture one series of tests, eg “Landing pad detection” or “Auto-tuning”.

Card 1: Manual flight performance check

Test 1 - Calibrate Magnetometer
Procedure	Goals / Objectives	Knockoff criteria
Turn on the drone
Perform magnetometer calibration on the flightline	Recalibrate the Magnetometer onboard simulate magnetometer recalibration during competition.	Magnetometer calibration process incomplete

Test 2 - Manual Controls Checks
Procedure	Goals / Objectives	Knockoff criteria
Turn on the drone
Bring the drone to the flightline
Enable logging
Arm in loiter
Test Full stick deflection in all axises	Test the control of the drone Check if Yaw twitch issue still exist (observed at the previous flight test)	Drone unstable unable to establish VLOS Timer threshold: flight time exceeded 5 min. VBatt below safety threshold: 40V QLAND immediately, disarm when landed. Recover drone & gather state of batteries Lost link Follow lost link procedures. Maintain vlos if possible. Contact necessary local authorities.
Check no telemetry link lost and OSD malfunction issue	Check telemetry link Check OSD quality during flight	OSD not displayed on the screen Good to continue the flight LTE lost link RTL the drone
Manually land the drone		Drone unstable unable to establish VLOS Timer threshold: flight time exceeded 5 min. VBatt below safety threshold: 40V QLAND immediately, disarm when landed. Recover drone & gather state of batteries Lost link Follow lost link procedures. Maintain vlos if possible. Contact necessary local authorities.

Card 2: Comp Sim of task 1

Test 1 - Fly multiple laps
Procedure	Goals / Objectives	Knockoff criteria
Turn on the drone
Execute the path_2024 to upload the mission 1 path	Make sure waypoint can be flashed onto the drone via dronekit	Waypoint flashing not successful Wrong waypoint is being flashed onto the drone
Bring the drone to the flightline
Enable logging
Arm in Auto
Wait for the drone to complete 2 laps and land.	Make sure drone is following the flight path as expected Check no LTE link lost during flight	Drone unstable unable to establish VLOS Timer threshold: flight time exceeded 5 min. VBatt below safety threshold: 40V QLAND immediately, disarm when landed. Recover drone & gather state of batteries Lost link Follow lost link procedures. Maintain vlos if possible. Contact necessary local authorities.

Card 3: Comp Sim of Task 2

Test 1 - Spline path flight
Procedure	Goals / Objectives	knock-off criteria
Turn on the drone
Execute the path_2024 to upload the mission 2 path	Make sure waypoint can be flashed onto the drone via dronekit	Waypoint flashing not successful Wrong waypoint is being flashed onto the drone
Bring the drone to the flightline
Enable logging
Arm in Auto
Wait for the drone to complete 2 laps and land.	Make sure drone is following the flight path as expected Check no LTE link lost during flight	Drone unstable unable to establish VLOS Timer threshold: flight time exceeded 5 min. VBatt below safety threshold: 40V QLAND immediately, disarm when landed. Recover drone & gather state of batteries Lost link Follow lost link procedures. Maintain vlos if possible. Contact necessary local authorities.

Card #2: Comp Sim of Task 2

Test 1 - Spline path flight
Procedure	Goals / Objectives	knock-off criteria
Turn on the drone
Execute the path_2024 to upload the mission 2 path	Make sure waypoint can be flashed onto the drone via dronekit	Waypoint flashing not successful Wrong waypoint is being flashed onto the drone
Bring the drone to the flightline
Enable logging
Arm in Auto
Wait for the drone to complete 2 laps and land.	Make sure drone is following the flight path as expected Check no LTE link lost during flight	Drone unstable unable to establish VLOS Timer threshold: flight time exceeded 5 min. VBatt below safety threshold: 40V QLAND immediately, disarm when landed. Recover drone & gather state of batteries Lost link Follow lost link procedures. Maintain vlos if possible. Contact necessary local authorities.

auto mission 1 -2 then manual flight check then land testing

There will also be a flight to set up the wall using tire and to land with just fpv camera

Explain what capacity you need, what needs to be mounted, etc.

Necessary items:

Pegasus
Houston

Flight characteristics needed:

Comms / Support needed:

🫂 Attendees

This is a section for all attendees from your subteam which will be present for this flight test. (because they are testing their products, or otherwise)

Name	Phone #	Sub-team	Role
Megan Spee			Media collection/ org / driver
Smile Khatri			Hardware
Yuchen Lin			flightline team
Nathan Green			flightline team / Driver
Tong Zhang			auto
Balaji Leninrajan			auto-airside
Georgia Vachon Westerlund			Media

This section and remaining to be filled out by FTC and Flightline Team

Flightline Team

Name	Role	Reason
Yuchen Lin	PIC	Practicing for Comp
Nathan Green	GSO

Pre-Flight Preparation

Checklists

Week-Before checklist

Software configuration correct

Compare against latest baselines and verify no params changed, or changes approved by comp-ft-team
Autopilot Orientation checked
Motors tested
Sensors outputs healthy & within range
Controller input mappings correct
Controller input choices correct for pilot preferences
Wireless trainer tested & working per pilot preferences.

Hardware (wiring)

Wires are not too tight or too loose (comfortable, not strained, not flapping around)
- No cut/exposed wires
- Shrouding is neat + presentable
- Solder joints look good
  - no cracks
  - no corrossion
  - no exposed contacts (unless expected)
- Connectors fully plugged in
- Connectors in good health

Hardware (airframe)

Bolts secure (nothing loose)
- Carbon fiber not cracked
- 3D prints not failing / crushed / cracked
- No loose items

Hardware (groundstation)

ELRS Gemini tested & Working
- Logging correct
- Data looks correct
- Control tower tested & working
Tracking antenna x2 (control + video) (mechanical)
- Servos secure
- Hardware (antennas) secure
- No cracks/bends/chips in polycarb/aluminum
- Gears / shafts look healthy
- Grease if necessary
Tracking antenna x2 (control + video) (electrical)
- Electrical components secure
- Power delivery / signal wires secure, no cracks/corrosion/damage
Video System
- goggles(?)
- Monitors(?)
- Video tower tested & working
Laptop w/mission planner configured correctly.
- LTE Link tested working

Flightline Kit

Spare motors
Spare props
Spare tools
- Metric allen keys
- Socket set
- Pliers (flatnose + needle nose)
USB-C cable (short & long)
Soldering iron + heat shrink + spare cables
Power supplies for ground station computer
Ground station computer
Spare bolts
Radio Controllers

Day-before checklist

Mission plan clear
flightline roles assigned
Communication hierarchy established
Incident procedures & roles in-place & briefed to all flightline team members
Timeline for day-of clear
Battery charging plan, equipment management plan clear.
Transportation clear

Day-of checklist

Batteries in safety bag
Equipment
- Zip tie
- duck tape
- label maker
- Type c cable
- ELRS/gemini
- charged WARG laptop
- spare bag for small electronics
- controller box
  - two controller
  - battery tester
- VTX box
execute

Debrief
clean / store equipment if necessary

Incident Procedures

⏲️ Flight Test Timeline

Date/Time	Action	Notes

2024-04-06 Pegasus CS2