Skip to end of banner Go to start of banner

LED Board Rev 2 Improvements

Skip to end of metadata

Created by Daniel Puratich on 2024-05-19

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

What
- add in CAN support
  - four pin JST for drone
- change to support peggy 2
- fix all comments in schematic
  - https://warg.365.altium.com/designs/0607B0A9-D0B3-4808-A201-214B5C1EDFB1#design
Why
- we are able to control the pattern in firmware without reflashing
Who
When

No labels