Big Project | Project | Project Manager |
|---|---|---|
Post-comp fixed wing | Wing Design |
Task Description
Based upon current CAD of the wings and research completed, design ailerons for our wings to allow for the correct flight controls. Refer to Wings for the design decisions made for the wings. The CAD can be found in PDM at Fixed Wing → Fixed Wing Design → Wings.
Additionally, refer to Aileron Sizing for a starting point. A lot of the research and calculations were based on Sizing Control Surfaces which can also be used for reference.
I suggest brainstorming a few ideas and asking for feedback as there are many factors at play. This task may require more research into aileron shapes. Some thought into linkage/servo connection would also be good.
Constraints
Constraints | Written By | Append Date |
|---|---|---|
1 aileron per wing |
| |
Adheres to sizing found in Aileron Sizing |
|
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@ assignee | Date assigned |
Task Progression/Updates
Author: @ person updating Date: YYYY/MM/DD
UPDATE TITLE
Include any updates here + reasoning