Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

 Announcements

  • EFS will hire a coop student next term; the job will be posted and processed on Waterloo Works

  • This is the last meeting of the term! Good luck to everyone on final exams!

 ZeroPilot M2/M3

Drivers

  • Sensor Fusion - Polly Liu & Liam Suter

    • prototyping with bmx160

    • Code tested and functioning on arduino

      • Need to calibrate the sensor as it’s not giving reasonable data currently

      • Starting code for the IMU on the STM32 in the meantime

 

  • GPS

    • new task opening?

Telemetry Manager Yarema Dzulynsky

  • No update: Waiting for new arch M1 to complete for porting M2 TM.

Path Manager Ayoung Eun

  • Ideation Code We’ve constructed simple landing/takeoff functions.

  • Can we schedule a meeting in near future to go through these and sketch out what we are missing and what we need to improve on? I set up a lettucemeet in the path manager channel.

 

Infrastructure

Core Dump Kabir Verma

  • Got the stack trace on a general project

ZP Validation Image Ethan Leung

  • Tried to do more testing but I can’t get the zp3 board to respond, need help.

ZP3.5 M2 Bring-Up

  • Stalled

 ZeroPilot New Architecture

Drivers Ethan Leung

  • Message Queue Dami Peng

    • Made PR for abstract interface. Boardfile interface is also finished. Will likely start implementation after finals?

  • Motor Channel (PWM) Bill Lu

    • Bill has sent me some updates on his interface and implementation, I will take a look later

  • RC Receiver Chandise Anderson

    • Finished interface, but had issues trying to push to my branch. I will start working on implementation this week and will ask if I have any issues about it

  • Watchdog Ronald You

    • basically ready for pr

    • need to review some minor details

Attitude Manager Sam Zhang

  • No updates, just waiting for the finalized interface between drivers for the PWM motor function and the queue.

System Manager Manasva Katyal

 CAN Projects

ESC (Jeffery Zhen)

  • CAN-ESC adapter DShot output is now working with motor attached

  • To Do:

    • look at the efs-canard code that was shared recently and integrate with CAN-ESC adapter

    • make a new copy of CAN-ESC code for future PR

Servo Tharun Ganeshram Fion Lin Herman Gahra

  • Larry Pan Code for the Rx queue implementation is done, will move on to testing next. Rx Queue to Shorten ISR

  • System testing is done with a single servo driver!

  • Looking for user-end documentation to be done

  • The code still needs to be cleaned up

  • Needs someone to facilitate the dynamic node allocation

 

Sensor Cluster Roni Kant

  • Tochi Okoro Dev board is lost .. :( Need to decide if we are going to buy another sensor or just wait for the EE board to be done. Until then, working on turning driver into a cpp class.

  • Henry Wu Yutong Zhu Sensor driver is basically done. Meeting with Roni Kant soon to work on integration with DroneCAN

  • Aidan Fisher Logic flow written for UHD mode, finishing coding it

  • Ria Prakash Moving to GPS driver task for now, so this task is put on hold

  • Roni Kant Worked with CAN people on porting to l4

LED Board Folarin Fatola (Unlicensed)

  • Worked on debugging the CAN integration code

  • TODO: Enable one lighting board node to act as a master for the rest of the lighting boards

6s Power Module Bryan Ma Harry Chen

  • We created a Confluence page for this task: 6S Power Module

    • This doc condensed most of what we know and don’t know about the project, so it was super helpful

    • Eventually, we would need to know more about the project specifics from the EE team, including:

      • How the MCU will receive voltage and current information from the battery monitoring circuits

      • What MCU ports to use

  • The Google Slide on CAN would be pretty useful to reference later on, but right now more help on CAN would be helpful - there are still no tutorials to follow, so we are still scratching our heads for the most part.

CAN Baud Rate Auto Sensing

 Groundside Infrastructure

Tracking Antenna Omer Sajid Jeremy Zheng

  • Flight test plan is updated to contain both pitch and yaw tracking

  • Currently Tracking Antenna is ready for flight test.

  • As of now, the Tracking Antenna (TA) works properly when it’s placed such that 0 degrees YAW aligns with north. However, in theory, the TA should be able to face any direction initially and then be calibrated to face north manually using the Arduino IDE. There is an issue when using the calibration method though, going into the bay tomorrow to work on it

 

 Available Tasks

  • No labels