Big Project | Project | Project Manager |
|---|---|---|
Fixed wing | Landing gear |
Task Description
Design and manufacture a landing gear for the post-comp fixed wing airframe.
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Supports a 5 kg frame
| July 28, 2024 | |
Plane does not tip about its center of gravity on ground. (need enough space between the front and rear wheels) | July 28, 2024 | |
Shock absorption mechanism (to prevent stress on the frame during landing) | July 28, 2024 | |
Minimum 2 inch prop clearance |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Assignees
Assignee | Asana Task | Date |
|---|---|---|
July 31 2024 |
Task Progression/Updates
Author: @ person updating Date: YYYY/MM/DD
UPDATE TITLE
Include any updates here + reasoning
Tricycle vs tail dragger
leaning towards tail dragger, gives prop clearance and easier to mount to the frame
tail dragger risk of tipping?
landing will be more flat
tail dragger good
spring steel to absorb shock
about the same price as shock absorbers.
springs easier to maintain, specs are available
pneumatic shocks? probably stick with spring shocks
spring shock can’t be tuned easily
start off w aluminum
Author: Ben Lovegrove 2024/09/05
Initial Design
Implementing tail dragger design, two wheels at front one at tail
This will give prop more clearance as it is tilted back
Using aluminum sheet metal with bends to absorb energy
Aluminum was chosen as it is light weight and meets design specs with the lowest safety factor being about 30 when stationary
The design uses the bends to also help create a more stable place
Front landing gear bend out to give wider base of support
Back landing gear goes straight back to try and keep the centre as in line with the CoG as possible
Author: Smile Khatri 2024/09/23
Steerable tail wheel to be designed
by Oct 2 , 2024
Front landing gear looks good - make it taller by 2 inch ish
Author: Ben Lovegrove 2024/09/26
The front landing gear were updated so that they were one piece. This causes the internal moment to be transferred from one part of the landing gear to the other instead of the reaction coming from the frame itself.
The front landing gear was also made thicker so that it could mount in 4 places at once which allow it to be more secure and support more weight.
The rear landing gear was changed so the wheel is in line with the mounting holes which will allow for better balance of the plane and also prevent the plane from turning to one side due to more friction on one side compared to the other.
