Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Task

Currently, our can node software has a fixed CAN bus baudrate. If the CAN bus baudrate is changed on the flight controller side, our CAN node will fail to work. The idea of this project is similar to UART baudrate auto sensing, the CAN node is able to sense the bit rate on the bus and change its bit rate accordingly either by trial and error or something smarter.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.