Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Next »

Antenna Placement

Left SMA slot is for 433Mhz antenna, right is for 2.4Ghz

Linkhttps://www.amazon.ca/RF-Explorer-Handheld-Spectrum-Analyzer/dp/B00H4B9A0E/ref=sr_1_6?ie=UTF8&qid=1490144159&sr=8-6&keywords=rf+explorer

Firmware and Desktop Application (Windows only)http://j3.rf-explorer.com/downloads

UART Api: https://github.com/RFExplorer/RFExplorer-for-.NET/wiki/RF-Explorer-UART-API-interface-specification

Datasheets:

Important Notes

Damaging RF

The device has a 5dbm or 3mW tolerance on the input signal it receives in its antennas, whether its OFF or ON. This means the device's RF module WILL BE DAMAGED if it is around a signal that is more than 5dBm, no matter what band its currently measuring it. Therefore keep the module at least 3cm away from any cellphones, and keep wary when measuring the 500mW - 1W UHF transmitters and the 250mW Xbee's.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.