Pre and Post Flight Checklist
- Brielle Chenier
- Sahil Kale
- R D
- Anthony Luo
Owned by Brielle Chenier
Bring to Field
WARG sign
Props
Electrical tape
Allen keys
Spare mounting screws
Scissors
Wrench
Zip ties
Fish wire
Test weight
Batteries
Transmitter and transmitter battery battery
Monitor
Base station
Telemetry laptop
Power bar
Battery connectors?
CV @R D
Lightbridge box
Monitor and power cable
CV box
Raspberry Pi micro-USB power (for Jetson)
Keyboard and mouse
WARG laptop
XBee ground
Pre Flight Checklist
Before going to the field:
MECH @Matthew Visser
Grabber is attached and properly tensioned (with mesh secure)
Gimbal/camera on the drone and camera is level
Tower and Camera
Check the tightness of landing gear and arm
CV @R D
Charge GoPro
Charge Lightbridge 2 ground
Connect GoPro and Lightbridge 2 air on drone
Connect Jetson, VectorNav, and XBee air on drone
Charge WARG laptop
FIRMWARE @Aidan Bowers (Deactivated)
Motor Test
Grabber test
Quick check on IMU to make sure direction looks nominal.
Check wires for being loose / bad connections.
ELECTRICAL @Daniel Puratich (Unlicensed)
On field, power off:
MECH @Matthew Visser
CV
FIRMWARE @Aidan Bowers (Deactivated)
ELECTRICAL @Daniel Puratich (Unlicensed)
On field, power on:
MECH
CV @R D
FIRMWARE @Aidan Bowers (Deactivated)
ELECTRICAL @Daniel Puratich (Unlicensed)
Post Flight Checklist
CV