6S Battery Mount
- Arjun Mandair
Big Project | Project | Project Manager |
|---|---|---|
Antenna Tracker | Electronics Cases | @Arjun Mandair |
Task Description
6S Battery Mount for the Antenna Tracker.
Constraints
To be written by the Project Manager. All constraints should be their own row of the table, if a constraint is removed it should be crossed out but left in the table. The append date is when the constraint was last updated (update this when constraints are removed!) DELETE THESE INSTRUCTIONS BEFORE PUBLISHING
Constraints | Written By | Append Date |
|---|---|---|
Securely held in place | @Arjun Mandair | Oct 10, 2023 |
Weatherproof | @Arjun Mandair | Oct 10, 2023 |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@Arjun Mandair | Oct 10, 2023 |
Task Progression/Updates
Author: @Arjun Mandair : Oct 10, 2023
First Design
Holes at bottom to allow rainwater to escape
Container to hold in place
Currently no slots for velcro
Author: @Arjun Mandair : Oct 11, 2023
Revision Number 1: Buckles
Having a 6S battery 30ft in the air is not the best with the current mount.
Dangerous and could fall on someone
@Conall Kingshott mentioned ordering buckles to hold it in place