PDB Case
Big Project | Project | Project Manager |
---|---|---|
Comp drone 2025 | Electronics Cases | @Alison Thompson |
Task Description
Pegasus 2 has a different PDB than Peggy 1, this means we need a new case for it.
Constraints
Constraints | Written By | Append Date |
---|---|---|
Mounts to 30x30mm grid on Peggy 2 in the same location as existing PDB | @Alison Thompson | Sep 17, 2024 |
Compatible with this PDB: https://pyrodrone.com/products/matek-xclass-fchub-30x30-pdb-12s-5v-12v-output?variant=39461908906027 | @Alison Thompson | Sep 17, 2024 |
No metal bolt head or washers contacting the board | @Daniel Puratich | Sep 17, 2024 |
Clearance for all electrical components and wires | @Alison Thompson | Sep 17, 2024 |
Include ventilation | @Alison Thompson | Sep 17, 2024 |
Relevant Contacts
Subteam | Contact | Contact Description |
---|---|---|
EE/Directors | @Daniel Puratich @Nathan Green | Answering any questions about the PDB itself |
Assignees
Assignee | Asana Task | Date |
---|---|---|
@ assignee | link to asana task assigned | Date assigned |
Task Progression/Updates
Author: @Alison Thompson Date: Sep 17, 2024
Initial Ideas
You can use the old PDB case seen in the COMP 2025 assembly and the makeshift case currently on the drone for inspiration
Progress:
First iteration of design is complete. A similar design to the old PDB case was used. Angled vents were added to force more airflow over the PDB. The shape of the case was altered to more closely match the shape of the PDB.
The bottom design and ventilation was kept very similar to the old design, with a change in shape to stay symmetrical with the top.
If there is a desire to add side protection, wire connections will have to be examined more closely and possibly altered.