Utility Mount x500 Airframe
- Evan Janakievski
Big Project | Project | Project Manager |
|---|---|---|
Comp 2025 | x500 Utility Mount and additional IR mount | @Evan Janakievski |
Task Description
Make a mounting plate similar to the one that comes with the x500 airframe. Add gaskets/oring to mounting holes to allow damping and friction fit onto airframe.
PX4 Development Kit - X500 v2 – Holybro Store
Design a mount for the IR camera so that it uses the mounting holes and doesn’t require the use of glue or zip-ties (Ie. fasten it properly).
Here’s the link to the camera: https://www.digikey.ca/en/products/detail/raspberry-pi/SC0873/17278646
Use the Picam mount on the Monster Mount as inspiration, can just adjust the dimensions to match mounting pattern.
C:\WARG_CAD\COMP2025\2025 Electronic Mounts\Raspberry Pi Cam Mount\C25_IR_CAM_MOUNT_P003_MODIFIED_COPY
Constraints
Constraints | Written By | Append Date |
|---|---|---|
Has 30.5x30.5mm mounting pattern | @Evan Janakievski | Mar 16, 2025 |
3d printed | @Evan Janakievski | Mar 16, 2025 |
Only requires glue for oring | @Evan Janakievski | Mar 16, 2025 |
Relevant Contacts
Subteam | Contact | Contact Description |
|---|---|---|
Subteam collaborating with | @ of contact | what is the contact responsible for? |
Assignees
Assignee | Asana Task | Date |
|---|---|---|
@Gabriel Singaraja | link to asana task assigned | Mar 13, 2025 |